Sanyo PLC-WU3800 - Manual (Page 38)

38
Choose Video or S-video by pressing the INPUT button
on the top control or the VIDEO or S-VIDEO button on the
remote control.
1

Video
Input Menu
Input Source Selection (Video, S-video)
Video Input
Direct Operation
Menu Operation
When video input signal is connected to the
VIDEO jack, select Video.
Video
When video input signal is connected to the S-
VIDEO jack, select S-video.
S-video
P
Note:
• When the Input Search function is set to On1 or On in
the Auto setup function, the input signal will be searched
automatically (p.46).
Top Control
INPUT button
Remote Control
VIDEO button
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input and
then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select either Video or
S-video and then press the SELECT button.
Video
S-video
Computer 1
HDMI
Computer ⁄
S-video
Video
⁄ COMPUTER  can not be selected when using the
COMPUTER IN 2/MONITOR OUT terminal as
MONITOR OUT output.
S-VIDEO button