Sanyo PLC-WU3800 - Manual (Page 33)

33
store? Store
Store
To store the adjusted data, select
Store and then press the
Point ► or the SELECT button. Move the highlight to one of
the Modes 1 to 5 in which you want to store, and then press
the SELECT button.
Mode free
To clear the stored data, select
Mode free and then press
the Point ► or the SELECT button. Move the highlight to the
mode that you want to clear and then press the SELECT
button.
P
Note:
• Display area (H/V) cannot be selected when 480i, 575i,
480p, 575p, 70p, 1035i or 1080i is selected in the PC
System Menu (p.30).
• When input computer signal to the projector, PC adjust
will become available.
Reset
To reset the adjusted data, select
Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
Computer Input
This mode has stored
parameters.
Values of Total dots, Horizontal,
Vertical, Display area H and
Display area V.
Press SELECT button to
store adjusted data.
Press MENU button
to close this dialog
box.
Mode free
Store
Vacant