Skil 3700 - Manual (Page 38)

Hardware Kit Router Insert
R2 Wing Nut 2
R3 Hex-head screws 2
R4 Washer 4
R5 Ring Reducer (assorted) 5
R6 Retaining Bracket 1
R7 Phillips Head Screw 3
R8 Router Fence 1
R9 Shim 1
R13 Safety Guard 1
R14 Featherboard 1
Hardware Kit 2
R10 Screw Knob Male 4
R11 Screw Knob Female 4
R12 Router Guard Bolt 4
38.
x4 x4
x2 x3 x4 x4 x2
R4
R3
R2
R7 R12
R10
R11
R6
R8
R14
R5
R13
R1
R9
Tools Needed For Assembly
Tools Needed For Assembly
MEDIUM SCREWDRIVER
COMBINATION SQUARE
PHILLIPS SCREWDRIVER
HEX WRENCH
ADJUSTABLE WRENCH SHOULD BE NO GAP OR OVERLAP
HERE WHEN SQUARE IS FLIPPED
OVER IN DOTTED POSITION.
COMBINATION SQUARE MUST BE TRUE
DRAW LIGHT LINE ON
BOARD ALONG THIS EDGE.
STRAIGHT EDGE OF BOARD 3/4"
THICK. THIS EDGE MUST BE
PERFECTLY STRAIGHT.
Estimated assembly time for the entire X-shop saw is less than 2 hours.
Petites pièces / Piezas pequeñas
COMPOSANTS DE LA PLAQUETTE AMOVIBLE POUR TOUPIE
Pour toupies Skil ® modèles 1810, 1815 et 1820
PIEZAS DEL ACCESORIO DE INSERCIÓN DE FRESADORA
Sirven para las fresadoras Skil ® modelos 1810,
1815 y 1820