SMC Networks ProSoft 1560 - Manual (Page 6)

6
Contents
1 Product Specifications
The ProSoft Technology, Inc. 1560-MBP card is a hardware
product designed to be a communications front end for Allen-
Bradley SCANport compatible products (1336 Plus/Force/
Vector, 1305, SMC Dialogue Plus, SMP3, etc.).
The product includes the following functionality:
1.1 Modbus Plus Specifications
•
Protocol modes:
Modbus Plus using licensed Schneider
Automation technology
•
S upported Modbus Plus Operations:
MSTR Type 1 - Write Data
MSTR Type 2 - Read Data
MSTR Type 5 - Write Global Data
MSTR Type 6 - Read Global Data
•
Supports Global Database Control from Host PLC
In this mode, the 1560-MBP will look for Control
Word and Reference in the selected Host Global
Database
•
Pre-assigned Modbus memory map
Read/Write
Command Control/Frequency
Datalinks Out : A to D
Up to 2000 drive parameter values
Read Only
Status/Feedback
Datalinks In : A to D
1.2 General Specifications
•
Configuration via dip switches
Slave Address : 1 to 64
Host Address : 1 to 64
Global Database Control Enable
Fault on Loss of Modbus Plus Enable
SCANport Messaging Options
No Datalinks
Datalinks A only
Datalinks A and B only
Datalinks A, B, C, D
•
Available packages:
Enclosed Power supplied externally (120 VAC)
Enclosed Power supplied externally (24 VDC)
Chapter 1 — Product Specifications