Sony STR-DH810 - Manual (Page 10)

10 GB
Indicator and explanation
J BI-AMP
Lights up when surround back speakers
selection is set to “BI-AMP” (page 71).
K SLEEP
Lights up when the Sleep Timer is activated
(page 45).
L LPCM
Lights up when the receiver is decoding the
Linear PCM signals.
M DTS(-ES) indicators
Lights up when the receiver is decoding the
DTS or DTS-ES signals.
DTS
DTS-ES
DTS 96/24 DTS
DTS-ES
DTS 96 kHz/24 bit
Note
When playing a DTS format disc, be sure that
you have made digital connections and that
INPUT MODE is set to “AUTO” (page 69).
N Tuning indicators
Lights up when the receiver tunes in radio
stations.
RDS (Models of area code CEL, CEK,
AU1 only)
A station that provides RDS services is tuned in.
MEM
Lights up when a memory function, such as
Preset Memory (page 48), etc., is activated.
ST
Stereo broadcast
O EQ
Lights up when the equalizer is activated.
P D.RANGE
Lights up when dynamic range compression is
activated (page 77).
Q
Lights up when the disc being played back
contains an LFE (Low Frequency Effect)
channel and the LFE channel signal is actually
being reproduced.
LFE
Indicator and explanation
R Playback channel indicators
The letters (L, C, R, etc.) indicate the channels
being played back. The boxes around the letters
vary to show how the receiver downmixes or
upmixes the source sound (based on the speaker
settings).
LH
RH
L
R
C
SL
SR
S
SBL
SBR
SB
Front Left High
Front Right High
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components
obtained by Pro Logic
processing)
Surround Back Left
Surround Back Right
Surround Back (the
surround back components
obtained by 6.1 channel
decoding)
Example:
Speaker pattern: 3/0.1
Recording format: 3/2.1
Sound Field: A.F.D. AUTO
LFE
SW
L R C
SL SR