Sony STR-DH810 - Manual (Page 16)

16 GB
a)
The following buttons have tactile dots. Use the
tactile dots as references when operating the
receiver.
– number 5, VIDEO 1
– N
– PRESET +, TV CH + (RM-AAP049 only),
PROG + (RM-AAP050 only), c (RM-AAP050
only)
b)
If you press ?/1 (A) and AV ?/1 (B)
simultaneously, the receiver and connected
components will turn off (SYSTEM STANDBY).
The function of AV ?/1 (B) changes
automatically each time you press the input
buttons (D).
c)
Press SHIFT (V) then only press this button.
d)
CD player, MD deck and tape deck only.
e)
CD player and MD deck only.
f)
CD player, MD deck and DAT deck only.
g)
LD player only.
h)
VCD player only.
i)
RM-AAP049 only.
j)
RM-AAP050 only.
k)
This button is also available for DIGITAL MEDIA
PORT adapter operation. For details on the
function of the button, refer to the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
Inserting batteries into the
remote
Insert two R6 (size-AA) batteries in the
RM-AAP049 (Models of area code U2 only)
or RM-AAP050 (Models of area code CEL,
CEK, AU1 only) Remote Commander.
Observe the correct polarity when installing
batteries.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds of
batteries.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
• When you replace the batteries, the programmed
remote codes may be cleared. If this happens,
program the remote codes again (page 85).
• When the remote no longer operates the receiver,
replace all the batteries with new ones.