Sony STR-DH810 - Manual (Page 20)

20 GB
a)
Notes on the SPEAKERS SURROUND BACK/
FRONT HIGH/BI-AMP/FRONT B terminals
connection.
• If you connect only one surround back speaker,
connect it to L of this terminals.
• If you are not using surround back speaker or
front high speakers, and you have an additional
front speaker system, connect the additional
front speaker system to this terminals.
Set “SB ASSIGN” to “SPK B” in the SPEAKER
menu (page 80).
You can select the front speaker system you
want using the SPEAKERS button on the
receiver (page 34).
• If you are not using surround back speaker or
front high speakers, you can connect the front
speakers to this terminals using bi-amplifier
connection (page 20).
b)
When you connect a subwoofer with an auto
standby function, turn off the function when
watching movies. If the auto standby function is
set to on, it turns to standby mode automatically
based on the level of the input signal to a
subwoofer, then sound may not be output.
Notes
• Before connecting the AC power cord (mains
lead), make sure that metalic wires of the speaker
cords are not touching each other between the
SPEAKERS terminals.
• After you have install and connect your speaker, be
sure to select the speaker pattern from SPEAKER
menu (page 78).
If you are not using surround back speakers or
front high speakers, you can connect the front
speakers to the SPEAKERS SURROUND
BACK/FRONT HIGH/BI-AMP/FRONT B
terminals using a bi-amplifier connection.
Connect the jacks on the Lo (or Hi) side of the
front speakers to the SPEAKERS FRONT A
terminals, and connect the jacks on the Hi (or
Lo) side of the front speakers to the
SPEAKERS SURROUND BACK/FRONT
HIGH/BI-AMP/FRONT B terminals.
Make sure that metal fittings of Hi/Lo attached
to the speakers have been removed from the
speakers. Not doing so may cause a
malfunction of the receiver.
After you have made the bi-amplifier
connection, set “SB ASSIGN” to “BI-AMP”
in the SPEAKER menu (page 71).
Bi-amplifier connection
AM EZW-T100 ANTENNA
DMPORT
IN 4 IN 3 IN 2 IN 1 TV OUT
ARC
DC5V
0.7A MAX IN 3 IN 2 IN 1
IN OPTICAL
MONITOR OUT
AUDIO OUT AUDIO IN
AUDIO OUT
AUDIO IN AUDIO IN
VIDEO IN VIDEO OUT
Y
PB/CB
PR/CR
L
R
OPTICAL
SAT/
CATV IN BD
IN DVD IN COAXIAL
SA-CD/CD/CD-R SAT/CATV SUBWOOFER
AUDIO IN
VIDEO IN
BD
AUDIO OUT
VIDEO OUT
AUDIO IN
VIDEO IN
VIDEO 1
MONITOR
HDMI ASSIGNABLE (INPUT ONLY)
COMPONENT VIDEO ASSIGNABLE (INPUT ONLY)
TV
TV
DIGITAL (ASSIGNABLE)
L R L R
L R
CENTER SURROUND
FRONT A
SURROUND BACK/
FRONT HIGH/
BI-AMP/ FRONT B
L R L R
SPEAKERS
FRONT A
SURROUND BACK/ FRONT HIGH/ BI-AMP/ FRONT B
L R CENTER SURROUND
Hi
Lo
Hi
Lo
SPEAKERS
Front speaker
(Right)
Front speaker
(Left)