Function for conversion of video signals – Sony STR-DH810 User Manual

Page 31

Advertising
background image

31

GB

Co
nn
ecti

on
s

The receiver is equipped with a function for converting video signals.
Video signals and component video signals can be output as HDMI video signals (HDMI TV OUT
jack only).

: Same type of signal as that of the input signal is output.
: Video signals are upconverted and output.

As the initial setting, video signals input from the connected component are output as shown in the
table above. We recommend you set the video conversion function to match the resolution of the
monitor you are using. For details, see “RESOLUTION” (page 83).

Notes on converting video
signals

• When video signals from a VCR, etc., are

converted on this receiver and then output to
your TV, depending on the status of the
video signal output, the image on the TV
screen may appear distorted horizontally or
no image may be output.

• When you play a VCR with an image

improvement circuit, such as TBC, the
images may be distorted or may not be
output. In this case, set the image
improvement circuit function to off.

• Converted HDMI image output do not

support “x.v.Colour (x.v.Color)” and Deep
Colour (Deep Color).

• The resolution of signals that can be

converted by the receiver is 480i only. Refer
to the operating instructions of each
connected component for details on video
output setting.

• HDMI video signals cannot be converted to

component video signals and video signals.

• The converted video signals are not output

from the MONITOR VIDEO OUT and
COMPONENT VIDEO MONITOR OUT
jack.

• The resolution of the signals output to the

HDMI TV OUT jack are converted up to
1080p.

To connect a recording
component

When recording, connect the recording
component to the VIDEO OUT jacks of the
receiver. Connect cords for input and output
signals to the same type of jack, as VIDEO
OUT jacks do not have an up-conversion
function.

Note

Signals output from the HDMI TV OUT or
MONITOR OUT jacks may not be recorded
properly.

Function for conversion of video signals

INPUT jack

OUTPUT jack

HDMI IN

COMPONENT VIDEO IN

VIDEO IN

HDMI TV OUT

COMPONENT VIDEO MONITOR OUT

MONITOR VIDEO OUT

Advertising