Samsung SRP-500 User Manual
Page 25
41
ESC ! n
[Name]
Select print mode(s)
[Format]
ASCII
ESC
!
n
Hex
1B
21
n
Decimal 27
33
n
[Range]
0 ≤ n ≤ 255
[Description]
Selects print mode(s) using n as follows:
Bit
Off/On
Hex
Decimal
Function
Off
00
0
Character font A (12 x 14) selected.
0
On
01
1
Character font B (12 x 12) selected.
1 - - -
Undefined.
2 - - -
Undefined.
Off
00
0
Emphasized mode not selected.
3
On
08
8
Emphasized mode selected.
Off
00
0
Double-height mode not selected.
4
On
10
16
Double-height mode selected.
Off
00
0
Double-width mode not selected.
5
On 20 32 Double-width mode selected.
6 - - -
Undefined.
Off
00
0
Underline mode not selected.
7
On
80
128
Underline mode selected.
[Notes]
• When both double-height and double-width modes are selected, quadruple
size characters are printed.
• Underlining is added to the entire width of each character, including the
space to the right of a character, but is not added to portions of lines that
were skipped by means of an HT.
[Default]
n = 1
[Reference]
ESC E, ESC –
42
ESC % n
[Name]
Select/cancel user-defined character set
[Format]
ASCII
ESC
%
n
Hex
1B
25
n
Decimal 27
37
n
[Range]
0 ≤ n ≤ 255
[Description]
Selects or cancels the user-defined character set.
When the Least Significant Bit (LSB) is 0, the user-
defined character set is canceled and the internal
character set is enabled.
When the LSB is 1, the user-defined character set is
selected.
[Notes]
• When the downloaded character set has been released, the internal
character set is specified automatically.
[Default]
n = 0
[Reference]
ESC &, ESC ?