Samsung SRP-500 - Manual (Page 37)

65
First byte (printer information)
Bit Off/On Hex Decimal Status for ASB
0 Off 00 0 Not used. Fixed to Off.
1 Off 00 0 Not used. Fixed to Off.
Off 00 0 Drawer kick-out connector pin 3 is LOW. 2
On 04 4 Drawer kick-out connector pin 3 is HIGH.
Off 00 0 On-line. 3
On 08 8 Off-line.
4 On 10 16 Not used. Fixed to On.
Off 00 0 Cover is close (Front & rear)
5
On 20 32 Cover is open (Front or rear)
Off 00 0 Paper is not being fed by the paper feed button. 6
On 40 64 Paper is being fed by the paper feed button.
7 Off 00 0 Not used. Fixed to Off.
Second byte (printer information)
Bit Off/On Hex Decimal Status for ASB
0 Off 00 0 Not used. Fixed to Off.
1 Off 00 0 Not used. Fixed to Off.
Off 00 0 No mechanical error. 2
On 04 4 Mechanical error.
Off 00 0 No auto cutter error. 3
On 08 8 Auto cutter error occurred.
4 Off 00 0 Not used. Fixed to Off.
5 Off 00 0 No unrecoverable error.
On 20 32 Unrecoverable error. 6
Off 00 0 Not used. Fixed to Off.
7 Off 00 0 Not used. Fixed to Off.
66
Third byte (paper sensor information)
Bit Off/On Hex Decimal Status for ASB
Off 00 0 Paper near-end sensor: paper adequate. Paper 0, 1
On 03 3 near-end sensor: paper near end.
Off 00 0 Paper end sensor: paper present. Paper end
sensor: 2, 3
On 0C 12 no paper present.
4 Off 00 0 Not used. Fixed to Off.
5 Off 00 0 Not used. Fixed to Off.
6 Off 00 0 Not used. Fixed to Off.
7 Off 00 0 Not used. Fixed to Off.
Fourth byte (paper sensor information)
Bit Off/On Hex Decimal Status for ASB
0 On 01 1 Not used. Fixed to On.
1 On 02 2 Not used. Fixed to On.
2 On 04 4 Not used. Fixed to On.
3 On 08 8 Not used. Fixed to On.
4 Off 00 0 Not used. Fixed to Off.
5 Off 00 0 Not used. Fixed to Off.
6 Off 00 0 Not used. Fixed to Off.
7 Off 00 0 Not used. Fixed to Off.
[Default] n = 0
[Reference]