Samsung SRP-500 - Manual (Page 28)

47
ESC ? n
[Name] Cancel user-defined characters
[Format] ASCII ESC ? n
Hex 1B 3F n
Decimal 27 63 n
[Range] 32 ≤ n ≤ 255
[Description] Cancels user-defined characters.
[Notes]
• This command cancels the pattern defined for the character code specified
by n. After the user-defined characters is cancelled, the corresponding
pattern for the internal character is printed.
• This command deletes the defined pattern for the specified code in the
character font selected by the "ESC !" command.
• If a user-defined character has not been defined for the specified character
code, the printer ignores this command.
[Reference] ESC &, ESC %
ESC @
[Name] Initialize printer
[Format] ASCII ESC @
Hex 1B 40
Decimal 27 64
[Description] Clears the data in the print buffer and resets the printer
mode to the mode that was in effect when the power was
turned on.
[Notes]
• The DIP switch settings are not checked again.
• The data in the receive buffer is not cleared.
48
ESC D n1... nk NUL
[Name] Set horizontal tab positions
[Format] ASCII ESC D n1...nk NUL
Hex 1B 44 n1...nk 00
Decimal 27 68 n1...nk 0
[Range] 1 ≤ d ≤ 255
0 ≤ k ≤ 32
[Description] Sets horizontal tab positions.
• n specifies the column number (counted from the beginning of the line) for
setting a horizontal tab position.
• k indicates the total number of horizontal tab positions to be set.
[Notes]
• The tab position is set at [character width x n] from the beginning of the
line. The character width includes the right-side space of the character,
and is twice the normal value when double-width is specified.
• This command deletes horizontal tab positions that have already been set.
• When "n = 8" has been set for the horizontal tab position, the printing
position moves to the ninth digit when HT is executed.
• Up to 32 tab positions can be set. Data exceeding 32 tab positions is
processed as normal data. Input <n>k in ascending order and place a NUL
code <00>H at the end when <n>k is less than or equal to the preceding
value <n>k-1, tab setting is finished and the following data is processed as
normal data.
• ESC D NUL cancels all horizontal tab positions.
• The previously specified horizontal tab positions do not change, even if the
character width changes.
[Default] The default tab positions are at intervals of 8 characters
(columns 9, 17, 25, ...) for the font B (12 x 14).
[Reference] HT