Samsung SRP-500 User Manual
Page 27
45
ESC - n
[Name]
Turn underline mode on/off
[Format]
ASCII
ESC
–
n
Hex
1B
2D
n
Decimal 27
45
n
[Range]
n = 0, 1, 48, 49
[Description]
Turns underline mode on or off,
• When n = 0 or 48, underline mode is turned off.
• When n = 1 or 49, underline mode is turned on.
[Notes]
• Underlines can be printed for all characters, but not for the space set by
HT.
• This command and ESC ! turn underline mode on or off in the same way.
• If n is out of the specified range, this command is ignored.
[Default]
n = 0
[Reference]
ESC !
ESC 2
[Name]
Select default line spacing
[Format]
ASCII
ESC
2
Hex
1B
32
Decimal 27
50
[Description]
Selects default (1/6-inch) line spacing.
[Reference]
ESC 3
46
ESC 3 n
[Name]
Set line spacing
[Format]
ASCII
ESC
3
n
Hex
1B
33
n
Decimal 27
51
n
[Range]
0 ≤ d ≤ 255
[Description]
Sets the line spacing to [ n x (1/192)] inches.
[Default]
n = 32 (1/6 inch)
[Reference]
ESC 2
ESC <
[Name]
Return home
[Format]
ASCII
ESC
<
Hex
1B
3C
Decimal 27
60
[Description]
Moves the print head to the standby position.
[Notes]
• The leftmost end is detected by the home position sensor.
• Since the home position is detected when this command is executed, the
printing position may shift after this command is executed.
ESC = n
[Name]
Select device
[Format]
ASCII
ESC
=
n
Hex
1B
3D
n
Decimal 27
61
n
[Range]
n = 1
[Description]
Selects device to which host computer sends data.
• n = 1 ; enable
• n = 2 ; disable
[Default]
n = 1