Samsung SV-DVD54T - Manual (Page 12)

ENG-11
Presetting the Stations Automatically
☛ You do not need to preset the stations if you
have already set them automatically (see Plug &
Auto Set Up on page 8).
Your STB-DVD-VCR contains a built-in tuner used to
receive television broadcasts.
You must preset the stations received through the tuner.
This can be done:
◆ Plug & Auto Set up (see page 8)
◆ Automatically
◆ Manually (see page 12)
You can store up to 80 stations.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding , ❷ buttons to select
the Install option.
3 Press the OK or ❿ to select this option.
Result: The Install menu is displayed.
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
Install
4 Press the corresponding or
❷ buttons, until the
Auto Setup is selected.
And then press the OK or
❿ to select this option.
Result: ◆ The Please Wait indication highlight on
the television screen.
◆ The first frequency band is scanned and
the first station found is displayed and
stored.
◆ The STB-DVD-VCR then searches for the
second station and so on.
◆ When the automatic scanning procedure
has finished, the STB-DVD-VCR switches
automatically to programme 1.
➢
The number of stations automatically stored by
the STB-DVD-VCR depends on the number of
stations found.
6 If you wish to cancel the auto scanning before the
end, press the MENU button to exit the menu.
➢
◆ Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required (see page
13).
Auto Setup
Please Wait
15%
5 Press OK to start the auto scanning.