Samsung SV-DVD54T - Manual (Page 22)

ENG-21
Using the Timer Programming
Feature
The Timer Programming feature allows you to preset
the STB-DVD-VCR to record a programme up to one
month before that programme is to be broadcast. Up to
six programmes can be preset.
☛
Before presetting a recording, check that the
date and time are correct.
1 Insert the cassette and press TIMER on the remote
control.
Result: The Timer method is displayed.
2 Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is
displayed.
3 Press ❿ to select the input source.
4 Select the required station by pressing the ,
❷
buttons or INPUT SEL. to select the LINE 1, LINE 2
input sources.
5 Press ❿ to select the recording day.
6 Select the required day by pressing the or ❷
buttons.
7 Press ❿ to select the recording start time.
8 Select the required hour value by pressing the
or ❷ buttons.
9 Press ❿ to select the minutes.
10 Select the required minute value by pressing the
or ❷ buttons.
11 Press ❿ to select the recording stop time.
You can check your preset recordings:
◆ When you have finished presetting the STB-DVD-
VCR
◆ If you have forgotten which programmes will be
recorded
1 Press TIMER on the remote control.
Result: The timer selection is displayed.
2 Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is
displayed.
3 Press the or ❷ buttons to select the required
programme.
4 Press the ➛ or ❿ buttons to select and change any
values as required. For more details, refer to the
previous page.
5 On completion, press RETURN twice.
Standard
G-Code
Timer Method
12 Select the required recording stop time by pressing
the
or ❷ buttons, following the same procedure
as when selecting the recording start time.
13 Press ❿ to select the recording speed.
14 Press the or ❷ buttons to select the SP
(Standard Play), LP (Long Play), Auto (Auto Tape
speed Select) recording speeds.
15 When you have finished, press the RETURN button.
16 Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the STB-DVD-
VCR compares the timer duration with the
remaining time on the cassette.
➢
Auto Tape Speed select. The STB-DVD-VCR’s
“Auto Tape Speed select” function compares the
duration of the timer recording to the actual
recording time remaining on the tape loaded.
If there is insufficient tape to complete a timer
recording in AUTO mode, the STB-DVD-VCR
automatically switches to LP mode to record the
whole programme.
Checking a Preset Recording