Samsung SV-DVD54T - Manual (Page 47)

ENG-46
Change PIN Code
1. To change the PIN Code, select the second
option “Change PIN Code”.
T his will take you to the following menu:
In this option, you need to enter the current PIN
Code at the first cursor, and at the second cursor
enter the desired PIN Code.
To confirm, you need to enter the new PIN Code
again.
Please remember the PIN Code should be a 4 digit
numerical value.
THE FACTORY PRESET PIN CODE : 0 0 0 0.
➢
If you forget the PIN Code, contact your dealer or
service provider.
Once you change password, please do not forget
and keep well.
Change PIN Code
Enter the old PIN code - - - -
- - - -
- - - - Enter the new PIN code
Confirm the new PIN code
STB
STB
STB
System Setup Parental Lock
Set Channel Lock
1. Select the TV or RADIO channel window by
pressing the
➛ , ❿
or TV/RADIO key.
2. Select the channel by pressing the , ❷ or
➛➛ , ❿❿ keys.
3. Select the channel lock by pressing INFO. key.
4. Press the OK key for confirmation.
This will lock the channel. Whenever you need to
view the channel, you will have to enter the PIN at
the request window.
After entering PIN Code to able to access a
parental locked channel, it will work on all parental
locked channels.
It means that you can access all parental locked
channels with entering PIN Code on any parental
locked channel successfully.
To cancel the lock :
1. Press the INFO. key again in order to cancel the
lock.
System Information
If you have to contact your service provider or a
service center they might ask for information
available from this menu.
Place the cursor on this sub menu and press the
OK key.
The following will be the on-screen display.
Time Setting
Time Setting is automatically done according to
Time Offset Table (TOT) of broadcasting signal. If it
is set different from the current time, you can adjust
it by changing Time Zone.
➢
It may be different from the time shown on the
VCR.