Samsung SV-DVD54T - Manual (Page 25)

ENG-24
Searching for a Specific Sequence
➢
This STB-DVD-VCR uses a standard indexing
system (VISS). As a result, it will recognize any
indexes marked by other VCRs using the same
system and vice versa.
Go To [0:00:00] Stop
Use this feature when you want to search for the
0:00:00 counter position on a cassette. Press the
CLEAR button at the point on the tape where you want
to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the
0:00:00 counter position, and then automatically stop at
that position.
1 After pressing the SEARCH, press the
corresponding
or ❷ buttons, until the Go To
[0:00:00] option is selected.
2 Press the OK or
❿
.
Each time you record a cassette on this STB-DVD-VCR,
an “index” is automatically marked on the tape when
recording starts.
The Search function allows you to fast-forward or
rewind to a specific index and start playback from that
point. Depending on the direction selected, the indexes
are numbered as follows:
2 1 1 2
➞
etc.
Prev
Seq.
Seq. being
played
Next
Seq. etc.
STB
End Search
Use this feature when you want to search for a blank
position to record a program on a cassette.
The VCR will fast forward, searching for a blank
position, and then automatically stop at that position.
If the VCR reaches the end of the tape during end
search, the tape will be ejected.
1 After pressing the SEARCH, press the
corresponding
or ❷ buttons, until the End
Search option is selected.
2 Press the OK or ❿ .
Intro Scan
1 After pressing the SEARCH, press the
corresponding
or ❷ buttons, until the Intro Scan
option is selected.
2 Press the OK or
❿
.
3 Press the ➛➛ or ❿❿ buttons depending on the
direction where your desired programme is located.
4 When an Index mark is found, the STB-DVD-VCR
will playback the tape for 5 seconds, after which it
will continue searching for the next Index mark.
5 If you want to watch the tape from a particular
Index, simply press
❿ II twice.
INTRO SCAN: ➛➛ ❿❿
STB