Samsung SV-DVD54T - Manual (Page 44)

ENG-43
This menu consists of 3 sub-menus:
Manual Scanning, Auto Scanning and Reset to
Factory Default.
1. Select “Installation” in the main menu mode to
select the sub menu.
2. Enter the PIN Code.
➢
If you have not entered your own PIN Code then
the PIN Code 0000 applies, which was set at the
factory.
Installation
STB
STB
Manual Scanning
To tune-in new channels and weak signals, the SV-
DVD54T has been provided with the option
“Manual Scanning” where the channel data can be
entered by the user. After selecting the “Manual
Scanning” from the Installation Menu, the following
screen will be displayed:
1. Select the channel which you want to find.
2. Input the frequency of the channel you want to
find.
3. Select the bandwidth. You can select the value
of 6, 7or 8 MHz.
4. After selecting option, press the OK key to start
the scanning process.
Teletext VBI
When the current broadcasting program provides
Teletext, press the TEXT key two times to see the
current Teletext VBI list. If Teletext VBI is available
on current programme, [ ] is displayed on the
banner after changing programme(channel).
To change the Teletext VBI:
1. Use the , ❷ keys to select a Teletext VBI
you want.
2. Press the OK key and then the Teletext VBI
you want is displayed on the screen.
➢
A television with TV functions supported shall be
used.The system shall operate with the subtitle
turned off.
Auto Scanning
The sub menu “Auto Scanning” will enable
download of the channels automatically from the
preprogrammemed load.
To download channels automatically:
1. You can select All or Free Only option mode.
All: Scanning all the channels
Free Only: Scanning free channels
2. Setting the maximum or minimum frequency.
3. Press the OK key.
Auto Scanning menu will be displayed.
All the channels in the list will be automatically
downloaded.