Samsung SV-DVD54T - Manual (Page 26)

ENG-25
The tape counter:
◆ Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
◆ Is reset when a cassette is inserted in the STB-DVD-
VCR
◆ Allows you to find the beginning of a sequence easily
☛
If the remaining time is to be calculated
correctly, you must indicate the type of cassette
being used.
1 Insert a cassette in your STB-DVD-VCR.
2 To set the tape counter to zero at the beginning of a
sequence:
◆ Press INFO. twice to display the counter
◆ Press CLEAR when you want to set the tape
counter to zero
3 When you are ready,
◆ Start playback or Recording.
◆ Press the ■ button.
◆ To fast-forward or rewind to the sequence at
which the counter was set to zero, press ➛➛ or
❿❿ .
➢
Some STB-DVD-VCR information, such as the
counter, can be displayed on the television screen
(unless you have deactivated the Screen messages
mode; refer to page 16).
Press INFO.:
◆ Once to display the current function,
programme number, recording speed, date,
time and counter
◆ Twice to display the counter only
◆ Three times to display the time remaining on
the cassette
◆ Four times to clear the display
Using the Tape Counter
Index Skip Search
This feature will enable you to fast forward/rewind to a
specific point on a tape: E.g. if you have recorded 3
different programmes on a tape and you have rewound
the tape to the beginning, by using this feature you can
go directly to the start of programme 2 simply by
pressing the SEARCH button.
1 After pressing the SEARCH, press the
corresponding
or ❷ buttons, until the Intro
Scan option is selected.
2 Press the OK or ❿ .
3 Press the ➛➛ or ❿❿ buttons twice more.
This will take you directly to the start of the desired
programme is located.
4 These Index searches can be made forwards:
(press
❿❿ ) or backwards: (press ➛➛ ).
( ➛➛ -20
● ●
0
● ●
+20 ❿❿✌
5 To cancel an Index search simply press the ❿ II or
■ button.
Searching for a Specific Sequence
0:00:00
INDEX SEARCH : ➛➛ -06