Sherwood R-772 - Manual (Page 45)

45
RECORDING
Recording with TAPE
• To record the analog signals onto the recording
equipment, be sure to connect the ROOM2 OUT
jacks to the recording equipment. (For details,
refer to "CONNECTING AUDIO COMPONENTS"
on page 8.)
• The analog signals from the EXTERNAL INs as well as the digital signals from the coaxial or optical digital input can be
heard but cannot be recorded.
• When recording the analog signals from CD, AUX, VIDEO 1 ~ 4, be sure to select the "ANALOG" for the AUDIO MODE.
(For details, refer to "When selecting the AUDIO MODE" on page 54.)
• The volume and tone (bass, treble) settings have no effect on the recording signals.
1.
Select the desired input as a recording source
except for TAPE.
2.
Turn on the ROOM 2.
3.
Select the MAIN as a ROOM 2 input.
4.
Start recording on the TAPE.
5.
Start play on the desired input.
ENGLISH Dubbing the audio and video signals
separately onto VIDEO 1
Example: When dubbing the VIDEO 2 video signal and
the CD audio signal separately onto VIDEO 1.
1.
Select VIDEO 2 as a video recording source.
2.
Select CD as an audio recording source.
3.
Start recording on the VIDEO 1.
4.
Start play on the VIDEO 2 and the CD
respectively.
• The audio signal from the CD and the video
signal from the VIDEO 2 will be dubbed and you
can enjoy them on the TV set and from the
speakers.
� Note : Be sure to observe the order of the above
steps 1 and
2 .
R-772(A) 2007.8.16 5:21 PM 페이지 45