Sherwood R-772 - Manual (Page 70)

ENGLISH
70
OFF : To turn off the ROOM 2 function.
↕
ON : To turn it on.
� Notes:
• When the ROOM 2 is set to OFF, the INPUT and the VOLUME cannot be selected.
• When you do not use the ROOM 2 function, set the ROOM 2 to OFF to save electricity.
When selecting the ROOM 2
• The ROOM 2 function allows enjoying one source in the main room while playing another in a different
room at the same time.
• You can adjust the volume on the power amplifier assigned to "BACK ← → ROOM 2" or "ROOM 2" when
the ROOM 2 speaker terminals are connected to the speakers in a different room.
� Note:
• You can adjust the VOLUME only when the surround back channels' power amplifier is assigned to "BACK
← → ROOM 2" or "ROOM 2". (For details, refer to "When selecting the AMP ASSIGN" on page 49.)
• ROOM 2 : To turn on or off the ROOM 2 function.
• INPUT : To select the desired ROOM 2 source.
• VOLUME : To adjust the volume on the power
amplifier assigned to "BACK ← → ROOM 2"
or "ROOM 2".
� Notes:
• The analog signals from the EXTERNAL INs and the
digital signals cannot be output to the different room,
meaning no playback in a different room.
• You cannot play the ROOM 2 source in any surround
mode.
� Note:
• The VOLUME cannot be adjusted when the AMP ASSIGN
is assigned to "BI-AMP" or "SURR BACK".
(For details, refer to "When selecting the AMP ASSIGN" on
page 49.)
SETTING THE MULTI ROOM SETUP
When selecting the INPUT
• You can select the desired among MAIN source, TUNER, CD, AUX, TAPE, VIDEO 1 ~ VIDEO 4 as a
ROOM 2 source.
� Note:
• When the EXTERNAL IN is selected as a main input, if the MAIN source is selected as a ROOM 2 input,
no audio signal can be heard in the different room (ROOM 2).
When selecting the VOLUME
1.
Press the CURSOR UP( ▲ )/DOWN( ▼ ) buttons to select the desired item.
2.
Press the CURSOR LEFT( ◀ )/RIGHT( ▶ ) buttons to set the selected item as desired.
R-772(A) 2007.8.16 5:21 PM 페이지 70