Sherwood R-772 - Manual (Page 46)

ENGLISH
46
1.
Select the desired of CD, AUX, VIDEO 1~4 as a
recording source.
2.
For digital recording, select the digital input as
recording signal input.
3.
Start recording on the component connected to
the OPTICAL DIGITAL OUT.
4.
Start play on the desired input.
DIGITAL AUDIO RECORDING WITH MD RECORDER
• Only when the OPTICAL DIGITAL OUT of this receiver is
connected to the OPTICAL DIGITAL IN of the MD recorder
or CD recorder, you can enjoy high-quality sound of digital
recording without converting the original signals. Refer to
"CONNECTING VIDEO COMPONENTS", "CONNECTING
AUDIO COMPONENTS" and "CONNECTING DIGITAL
INS and OUT" on pages 6~9 and the operating instructions
of the MD recorder or CD recorder.
� Notes:
• Depending on the digital audio signal format input into the
HDMI IN connector, some digital signals cannot be output
from the OPTICAL DIGITAL OUT jack.
• Digital recording is available for the digital audio program
sources such as CDs, MDs, some DVDs, etc.
• In most DVDs and SACDs as well as some CDs, etc.,
digital recording may not be available depending on the
signal format.
• There are some restrictions on recording digital signals.
When making digital recordings, refer to the operating
instructions of your digital recording equipment to know
what restrictions are imposed.
� Note :
• If the AUDIO MODE is set to the mode other than
"DIGITAL" for the corresponding recording source
on the INPUT SETUP menu, the digital audio
signals from the selected digital input will not be
output and there will be no recording. (For details,
refer to "When CD, AUX, VIDEO 1~ 4 is selected
as an input source" on page 31 and "When
selecting the AUDIO MODE" on page 54.)
Dubbing from video components onto
VIDEO 1
• The audio and video signals from the desired
input will be dubbed onto the VIDEO 1 and you
can enjoy them on the TV set and from the
speakers.
1.
Select the desired of VIDEO 2 ~ 4 as a recording
source except VIDEO 1.
2.
Start recording on the VIDEO 1.
3.
Start play on the desired input.
� In case of recording the digital audio signal input
into a HDMI IN connector
• Select the desired recording source to which the HDMI
IN is connected and assigned and then perform the
steps 3 and 4 (, but ignore the step 2).
� Note :
• If the AUDIO MODE is set to the mode other than
"HDMI" for the corresponding recording source on the
INPUT SETUP menu, the digital audio signals will not
be output and there will be no recording. (For details,
refer to "When selecting the AUDIO MODE" on page
54.)
R-772(A) 2007.8.16 5:21 PM 페이지 46