Samsung SF 4700 - Manual (Page 134)

6.9 Maintenance
Replacing the Print Cartridges
If a print operation is blank, portions missing, or the colors are very
wrong, the print cartridge may be out of ink. If the output is still blank
after cleaning the print head at least five times, replace the cartridge.
The SF-4700 keeps track of the ink level in each of the three cartridge
types: black, color, and photo. When you tell the system that a new
cartridge has been installed, then the ink level for that cartridge type is
set back to full.
If you tell the system that you are installing an old cartridge, the ink
level for that cartridge type is not reset. This allows exchanging the
black and photo cartridge as required while maintaining the ink level for
both. You can also use the old selection when you take a cartridge out
for cleaning.
Replacement of the print cartridges can be done from the front panel of
the SF-4700 or from the computer using the SF-4700 Series Control
Program.
Replacing Print Cartridges from the SF-4700
1. Press Cartridge on the front panel.
The print cartridge carrier moves to the center position of the unit.
2. Lift the front panel by grabbing the panel along the top edge.