Samsung SF 4700 - Manual (Page 96)

4.35 Stand-alone Fax
Selectable Options
These instructions assume you have followed the steps on page 4.34
under ‘Setting an Option’ and the machine is prompting you to change
one of the options listed here.
• PAPER SIZE — Select the paper size you will use for recording.
LETTER, A4 and LEGAL sizes are available.
• SENDING CONFIRM — A confirmation report shows whether the last
transmission was successful or not, how many pages were sent, etc.
Select ON-ERROR to print only when an error occurs and the
transmission was not successful.
Select ON to print a confirmation report automatically each time you
send a fax.
Select OFF to turn off.
• IMAGE TCR — When printing a Sending Confirmation report, you can
specify if you want an image of the first page of the fax included in the
report.
Select ON to print the image on the report.
If not, select OFF.
• AUTO JOURNAL—A journal shows specific information concerning
transmission or reception activities, the time and dates of up to 50 of
the most recent transmissions or receptions.
Select ON to print journal automatically after every 50 transmissions or
receptions.
Select OFF to print journal manually.
• RCV. START CODE — The remote receive start code allows you to
initiate fax reception from an extension phone plugged into the EXT
jack on the back of your machine. If you pick up the extension phone
and hear fax tones, enter the remote code and the machine will start
receiving. The password is preset to 9 at the factory.
Enter the desired code 0 to 9 on the number keypad.
• ECM MODE (Error Correction Mode) — This mode compensates for
poor line quality and ensures accurate, error-free transmission with
another ECM-equipped facsimile machine. If the line quality is poor,
transmission time may be increased when the ECM is enabled.
Select ON to enable.
Select OFF to disable.