Samsung SF 4700 - Manual (Page 82)

4.21 Stand-alone Fax
Speed Dialing
You can store up to 50 numbers in 2-digit Speed Dial locations (01-50).
Storing a Number for Speed Dialing
1. Press and hold Speed for about 2 seconds.
2. Enter a 2-digit location number (01 through 50) where you want to
store a number, then press Start/Enter.
If a number has already been stored in a location, the display shows
the number. To edit the number, see the next page.
3. Enter the number you want to store, then press Start/Enter.
where xx represents the
speed location you have
selected at step 2.
Using Address Label
A One-touch label sheet is included with your machine. As you store
numbers in one-touch dial buttons, make a note of the numbers on the
label to remind you which number is stored in each position.
1. Remove the clear cover and
label.
2. Write information on the
label and replace the label
and cover.
You may want to use pencil
in case you wish to change
these numbers later.
01
02
03
04
05
06
07
08
09
10
ENTER LOCATION
NO.[01-50]> ##
Sxx:05512637522