Samsung SF 4700 - Manual (Page 63)

4.2 Stand-alone Fax
Setting the Default Resolution and Contrast
The print resolution and contrast can be set to the most frequently used
modes. When a document is sent, the default contrast and resolution
mode will be activated unless otherwise changed by using the
Resolution or Contrast button on the front panel.
1. Press Setup on the front panel. The display shows the first menu;
DATE & TIME.
2. Press Menu repeatedly until you find ‘SYSTEM SETUP.’
3. Press Start/Enter to access the System Setup menu. The first
option, ‘RINGER VOLUME’ appears.
4. Press Menu until you find ‘DEF. RESOLUTION.’
5. Press Option repeatedly until you find the desired mode:
• Use STANDARD for most documents.
• Use FINE for documents with fine detail, such as small print.
• Use SUPER FINE for documents that have extremely fine detail.
6. Press Menu to find ‘DEF. CONTRAST.’
7. Press Option repeatedly until you find the desired mode:
• Use NORMAL for documents of average or normal contrast.
• Use LIGHTEN for documents with high contrast or dark images.
• Use FAX PHOTO for obtaining maximum image quality with
documents that contain photographs with shades of gray.
• Use DARKEN for documents with low contrast or light images.
8. Press Start/Enter to save the setting. Then, to return to Standby
mode, press Stop.