SMC Networks SMC9432BTX - Manual (Page 23)

2-5
N
ETWORK
C
ABLE
C
ONNECTION
Figure 2-3. Connecting a Thin Coax Cable
Connecting a Fiber Cable
The SMC9432FTX comes with an SC connector that supports
100BASE-FX fiber connections using 62.5/125 µm multimode fiber
optic cabling. Because SC connectors are keyed, they can only be
attached in one manner.
Use the following procedure to make an SC connection to the
network.
1. Connect one end of the cable to the card’s SC connector and
the other end of the cable to the fiber connector on the other
device (see Figure 2-4 on the following page).
2. Make certain that the device you are connecting to is specified
for 100 Mbps operation.