SMC Networks SMC9432BTX - Manual (Page 67)

D-3
U
SING
EZS
TART
Installing EZStart
The EZStart utility can be run from the SuperDisk or the hard disk.
EZStart can also be installed and run using Microsoft Windows for
Workgroups 3.x by double-clicking on the EZStart icon.
Windows 95/98, Windows NT, or OS/2 Installation
Exit Windows NT or shut down Windows 95/98 and reboot your
computer to the DOS prompt (not a DOS window). Follow the
instructions for installing and running EZStart in a DOS
environment.
Hard Disk Installation in a DOS Environment
To run EZStart under DOS without using the SuperDisk, or to run
EZStart from your Windows desktop, use the following procedure
to load EZStart on your hard disk.
1. Insert the SuperDisk in a drive.
2. Using the DOS COPY command, copy all the files from the
SuperDisk to a single directory on the hard disk. For example:
C:\> COPY A:\*.* C:\SMC <Enter>
Installation in a Windows 3.x Environment
1. Load EZStart on the hard disk as described above.
2. Start Microsoft Windows.
3. From the Program Manager, select “File,” “New,” and then
“Program Item.”
5. Select “OK.”