SMC Networks SMC9432BTX - Manual (Page 27)

3-3
I
NSTALLING AND
C
ONFIGURING
N
ETWORK
D
RIVERS
6. The message “The file netapi.dll on SMC SuperDisk could not
be found” appears. Specify the path to the Windows 95/98 CD
(or the Windows 95/98 path you have designated), and click
on “OK”.
6. You may be prompted for Windows 95/98 installation files. If
so, click on “OK” and then type the path to your Windows
95/98 CD, or change the path to those files on your hard drive,
and click “OK”.
7. Follow the remaining Windows 95/98 instructions to complete
the installation. After all the files have been copied, you are
prompted to reboot for the changes to take effect. Select “Yes”
when prompted to restart your computer, and remove the SMC
SuperDisk.
Optional procedures to modify card settings and add
network protocols
K Double-click on the “My Computer”, “Control Panel”, and
“Network” icons. The “Network” dialog box appears. If the
correct network protocols are not installed in the “Primary
Network Logon” list box, select the primary network to which
you will be attaching. Click on “Add”. The “Select Network
Component Type” dialog box appears. Follow the on-screen
directions to select network protocols.
K For peer-to-peer networks, you may wish to enable “File and
Print Sharing” in the “Network” dialog box.
K To modify other network card properties, select the
appropriate tab or click on the “Properties” button from the
“Network” dialog box and modify properties as desired.