SMC Networks SMC9432BTX - Manual (Page 42)

4-2
T
ESTING THE
N
ETWORK
C
ARD
Introduction
EZStart is a multi-function Windows-like utility provided on the
SuperDisk. EZStart lets you install network drivers, test the
EtherPower II 10/100 network card, and display driver installation
instructions simply by pointing and clicking your mouse.
EZStart can perform the following tests on the network card to
verify its functionality:
K Basic Adapter Test—verifies the operation of the network card's
basic functions. See page 4-3.
K Two-Node Adapter Test—verifies the network card's ability to
communicate over the network with another card. At least one
other computer containing an SMC network card must be
connected to the network. As long as the cards are interfaced to
an Ethernet (or Fast Ethernet) hub that supports 10/100 Mbps
switching capability, the two-node test can be performed with a
mixture of 10 Mbps and 100 Mbps cards. See page 4-3.
K Network Card Diagnostic Utility—a Windows-based network
card diagnostic utility that provides a quick, convenient way for
Windows 95/98 and Windows NT v4.0 and v3.51 users to test
the basic functions of their EtherPower II 10/100 network card.
See page 4-6.