Tethering – Samsung GALAXY S SGH-T989D User Manual
Page 166
158
Wi-Fi Status Indicators
The following icons indicate the Wi-Fi connection status:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point (WAP).
Displays when Wi-Fi is active and there is an available
open wireless network.
Displays when Wi-Fi is configured for a direct
connection to another compatible device in the same
direct communication mode.
Wi-Fi Advanced Settings
The Wi-Fi settings - Advanced menu allows you to set up many of
the device’s Wi-Fi services, including:
•
Setting the Wi-Fi sleep policy
•
Viewing the device’s MAC Address
•
Configuring use of either a DHCP or Static P
To access the Wi-Fi Advanced Settings menu:
1.
Press
and then tap
(Settings)
Wireless and network
Wi-Fi settings.
2.
Press
and then tap Advanced.
Tethering
This option allows you to share your phone’s mobile data
connection via a direct USB connection between your phone and
computer.
Note: You can also create a wireless access point that can be used by multiple
computers. For more information, refer to “Portable Wi-Fi Hotspot” on
Note: You can not mount your phone’s microSD card to your computer while
using the USB tethering feature. If additional software or USB drivers
are required, navigate to
and select Support
Downloads.
1.
Press
and then tap
(Settings)
Wireless and network
Tethering and portable hotspot.
2.
Connect the USB cable between your computer and your
phone.
3.
Tap USB tethering from the Tethering menu. This places a
green check mark next to the entry and activates the
feature. The Tethering active icon
appears in the
Status bar.