King Controls KD-2200 - Manual (Page 32)

Page 30
Note: Not all receivers will display a screen with
options that include superdish and alternate boxes.
5. Make sure Superdish and Alternate boxes
are NOT selected.
6. Highlight Test and press Select.
The unit will perform a check switch test, and the dish will periodically move back and forth.
(This process will take several minutes.)
7. When test is complete, a screen similar to one below or on the next page should appear.
After screen verification, continue with check switch procedure on next page.
Receivers are always changing, and therefore screen graphics may vary.
Older Dish receivers, for example, may not show “OK” for the 72 satellite.
DISH 500 DISH HD Eastern Arc
DISH HD Western Arc with Locals DISH HD Eastern Arc with Locals
MUST SHOW
“SW21”
NO “X”s
MUST SHOW
“SW64”
NO “X”s
Screen graphics may vary.