King Controls KD-2200 - Manual (Page 40)

King-Dome AIR Off-Air Antenna and Existing Off-Air Antenna
1. Lock on your satellite with the King-Dome AIR (see instructions on page 32).
2. Raise or turn on the other off-air antenna (not the King-Dome AIR ).
3. Perform a channel scan (see your TV or converter box owner’s manual).
4. Go to the signal meter screen and fine tune the signal strength as high as possible using the
existing off-air antenna (see your owner’s manual).
5. After peaking the signal strength, perform the channel scan again. You are now ready to
watch TV. Enjoy!
Page 38
Note: Performing a channel scan in steps 3 and 5 will erase channels from your previous scan. If you wish to keep
previous channels, you may have an “Update” or “Edit” feature on your digital TV or converter box. See your TV
or converter box owner’s manual for details.