King Controls KD-2200 - Manual (Page 6)

KIT CONTENTS
1. Unpack and identify all components (Fig. 4).
Page 4
SECTION 3
INSTALLATION
Fig. 4
TOOLS AND MATERIALS REQUIRED
• drill and drill bit set
• tape measure
• 7/16” open end wrench (coax connections)
• adhesive sealant (compatible with roof material)
• appropriate fasteners to install all components and wiring
• 5/32” allen wrench, channel lock or pliers (to remove shipping bolts)
• wire cutter (to remove shipping tie strap)
• Optional: #1844 King Controls Keypad
KIT CONTENTS
#1844 Keypad