King Controls KD-2200 User Manual

Page 7

Advertising
background image

Page 5

IMPORTANT! The tie strap and spacer, and the shipping bolts and washers must be removed from the

bottom of the dome unit prior to installation. DO NOT REMOVE THE DOME COVER TO
REMOVE THESE SHIPPING RESTRAINTS.

YOU MUST PLUG THE SHIPPING BOLT HOLES WITH THE SUPPLIED PLUGS (ATTACHED TO
TIE STRAP SHIPPING RESTRAINT).

2. Remove and discard the tie strap and spacer (KEEP RUBBER PLUGS AND GREASE

PACKET), and the 2 bolts and 2 washers that pass through the bottom of the base (Fig. 5).

3. Insert provided plugs into holes that were occupied by the shipping bolts. Inserted plugs

should be flush with base (Fig. 5).

Fig. 5

IMPORTANT!

Remove and discard Tie

Strap and Plastic Spacer

prior to installation.

KEEP RUBBER PLUGS

AND GREASE PACKET.

IMPORTANT!

Remove and discard

Shipping Bolts and

Washers prior to

installation.

IMPORTANT!

After removing shipping bolts, firmly

insert plugs into holes. Plugs should

be flush with base.

Advertising
This manual is related to the following products: