Konica Minolta IP-011 - Manual (Page 41)

Chapter 3 Printer Driver
IP-011 Printer Controller 3-3
■ Working Environment
● Compliant OS
The Printer Driver can be used on the following OS.
Windows 95
Windows 98
Windows NT 4.0
Windows 2000 (to be supported)
Refer to “2 Setup” (2-1 page) for installation of the Printer Driver.
■ Property of Printer Driver
On the [Printer] window shown by clicking [Start]-[Settings]-[Printers], right-click the [KONICA IP-011] icon. When
[Properties] is clicked on the shown menu, [KONICA IP-011 Properties] will appear. You can set all functions of the
Printer Driver on [KONICA IP-011 Properties].
You can perform any printer settings but [General] tab / [Detail] tab / [Color Management] tab / [Share] tab of
[KONICA IP-011 Properties] from applications. Refer to “2 Setup” (2-1 page) for how to perform printer settings
from applications.
Additionally, refer to “4 Operation Panel Setup” (4-1 page) for how to perform printer settings from the 7020 series
operation panel and “5 Status Monitor and Control Panel” (5-1 page) for how to perform printer settings from the
Printer Tools.
[OK]
When the [OK] button is clicked, all tab settings are saved and close the properties screen.
[Cancel]
When the [Cancel] button is clicked, all tab settings are canceled and close the properties screen.
[Apply]
When the [Apply] button is clicked, the present tab settings are saved. This button is used when
settings continue to be performed by using other tabs, and the present tab settings are registered
before using other tabs.