Konica Minolta IP-011 - Manual (Page 74)

Chapter 4 Control Panel Setup
IP-011 Printer Controller 4-11
■ Functions of the Printer Setting
● Network Setup
Select [1. Setting]-[1. Network Setup] on the Printer Setting screen to display the network setup screen. [1.
Network setup] is displayed only when the KN-304 is attached.
Items of the network setup screen are as follows: Refer to the operating manual of the KN-304 for details of the
network connection.
[1. TCP/IP Setup]
Press [1] to display the TCP/IP Setup screen. IP Address, Subnet Mask, Gateway, Enable DHCP
and Enable LPD Banner can be set on the TCP/IP Setup screen.
[2. NetWare Setup]
Press [2] to display the NetWare Setup screen. Server Name, Server Password, Queue Scan Rate,
Frame Type, Disable Bindery, NDS Context and NDS Tree can be set on the NetWare Setup
screen.
[3. Password Protection]
Press [3] to display the Password Protection screen. A password used for the network setup can be
set and changed.
● Select Language
Select [1. Setting]-[2. Select Language] on the Printer Setting screen to display the Select Language screen.
Items of the Select Language screen are as follows. The factory default is [1. English].
For US, Only English is available.
[1. English]
Press [1] to set the system language to English.
[2. French]
Press [2] to set the system language to French.
[3. Italy]
Press [3] to set the system language to Italian.
[4. German]
Press [4] to set the system language to German.
[5. Spanish]
Press [5] to set the system language to Spanish.
For US : English Only