Konica Minolta IP-011 - Manual (Page 82)

Chapter 5 Status Monitor and Control Panel
IP-011 Printer Controller 5-5
■ How to Operate the Status Monitor
● Starting the Status Monitor
In the case that you set the Status Monitor
to automatically start at the time of
installing the Printer Tools, the Status
Monitor automatically starts when
a computer starts.
Immediately after the [Konica IP-011 Status
Monitor] window has been displayed, the
printer status is checked.
● Finishing the Status Monitor
Click [View] menu-[Finish] on the
[Konica IP-011 Status Monitor] window.
● Restarting the Status Monitor
Click [Start]-[Program]-[KONICA IP-011]-
[KONICAIP-011 Printer Tools] to
start the Status Monitor again after you
have exited from the Status Monitor.
Immediately after the [Konica IP-011 Status
Monitor] window has been displayed, the
printer status is checked.