Mounting the seat, Removing the battery x, Mounting the seat removing the battery – KTM 690 ENDURO EU User Manual
Page 105: Maintenance work on chassis and engine
MAINTENANCE WORK ON CHASSIS AND ENGINE
103
9.49
Mounting the seat
100276-10
– Hook slot
of the seat onto screw
, press the rear downward and at the same time
push it forward.
– Push locking pin
into lock housing
and push the back of the seat down until the
locking pin locks in place with an audible click.
– Finally, check that the seat is correctly mounted.
9.50
Removing the battery
x
Warning
Risk of injury Battery acid and battery gases cause serious cauterization.
– Keep batteries out of the reach of children.
– Wear suitable protective clothing and goggles.
– Avoid contact with battery acid and battery gases.
– Keep the battery away from sparks or open fire. Charge only in well ventilated rooms.
– In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least 15
minutes and contact a doctor.
– Remove the seat. (