KTM 690 ENDURO EU - Manual (Page 140)

MAINTENANCE WORK ON CHASSIS AND ENGINE
138
100205-10
– Remove the plug  with the oil screen  and O-rings.
100206-10
– Remove the plug  with the oil screen  and O-rings.
– Drain the remaining engine oil.
– Thoroughly clean parts and sealing area.
– Check parts for damage and wear. Replace damaged or worn parts.
100207-10
– Position oil screen  with O-rings.
– Refit plug
 with O-ring and tighten it.
Specification
Plug, oil screen M20x1,5 15 Nm (11.1 lbf ft)