Riding instructions – KTM 690 ENDURO EU User Manual

Page 49

Advertising
background image

RIDING INSTRUCTIONS

47

Note

Engine failure Overheating of engine.
– If the coolant temperature warning lamp lights up, stop and switch off the engine. Allow the engine to cool down and check the

coolant level in the radiator, and top up if necessary. If you continue with the coolant temperature warning lamp alight, you may have
engine failure.

Info

If you hear unusual noises while riding, stop immediately, switch off the engine and contact an authorized KTM workshop.

100212-10

– When conditions allow (incline, road situation, etc.), you can shift into a higher gear.
– Release the throttle while simultaneously pulling the clutch lever, shift into the next

gear, release the clutch and open the throttle.

Info

For the positions of the 6 forward gears, see the illustration. The neutral or idle
position is between the first and second gears. First gear is used for starting off
or for steep inclines.
The operating temperature is reached when 5 bars of the temperature indicator
light up.

– When you reach maximum speed after fully opening the throttle, turn back the throttle

to about ¾ of its range; the speed hardly drops, but the fuel consumption falls consid-
erably.

– Open the throttle only as far as the road and weather conditions permit. Particularly in

bends, do not shift and open the throttle only very cautiously.

– To shift down, brake if necessary and close the throttle at the same time.
– Pull the clutch lever and shift into a lower gear, release the clutch lever slowly and open

the throttle or shift again.

Advertising
This manual is related to the following products: