KTM 690 ENDURO EU - Manual (Page 57)

GREASING AND SERVICE TABLE
55
K10N K50A K100A J1A J2A
Wheels Check the chain wear. ( P. 74) • • • • •
Check rear sprocket / engine sprocket for tightness. • • • • •
Check rear sprocket / engine sprocket for wear. ( P. 73) • • • • •
Check the chain tension. ( P. 70) • • • • •
Clean the chain. ( P. 69) • • • • •
Check wheel bearing for play. x • • • •
Checking the rear hub rubber dampers. x ( P. 97) • • • •
K10N: after 1,000 km (621.4 mi)
K50A: every 5,000 km (3,107 mi) / after every race
K100A: every 10,000 km (6,214 mi)
J1A: annually
J2A: every 2 years
8.2
Important maintenance work to be carried out by an authorized KTM workshop. (as additional order)
K100A J1A J2A
Carry out a complete fork service. x • •
Carry out a complete shock absorber service. x • •
Clean and grease steering head bearing and sealing elements. x •
Treat electric contacts with contact spray. • •
Clean the battery terminals and treat them with contact grease. • •
Change coolant. x •
K100A: every 10,000 km (6,214 mi)
J1A: annually
J2A: every 2 years