Changing the main fuse, Maintenance work on chassis and engine – KTM 690 ENDURO EU User Manual
Page 109
MAINTENANCE WORK ON CHASSIS AND ENGINE
107
100151-10
– Connect the battery charger to the battery. Switch on the battery charger.
Battery charger (58429074000)
You can also use the battery charger to test rest potential and start potential of the bat-
tery, and to test the generator. With this device, you cannot overcharge the battery.
Info
Never remove the lid
.
Charge the battery according to the instructions
on the battery casing.
– After charging, switch off and disconnect the battery charger.
Specification
The charge current, charge voltage and charge time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use.
3 months
– Install the battery.
9.53
Changing the main fuse
Warning
Fire hazard The electrical system can be overloaded by the use of incorrect fuses.
– Use only fuses with the prescribed amperage. Never by-pass or repair fuses.