KTM 690 ENDURO EU - Manual (Page 86)

MAINTENANCE WORK ON CHASSIS AND ENGINE
84
400418-10
– Check that leaf spring  in the brake caliper and sliding plate  in the brake caliper
support are seated correctly.
100291-01
– Insert the brake pads, insert the bolt and mount the split pin.
– Operate the hand brake lever repeatedly until the brake linings lie on the brake disc and
there is a tight spot.
100254-12
– Adjust the brake fluid level to level  .
Specification
Measurement of  5 mm (0.2 in)
Brake fluid DOT 4 / DOT 5.1 ( P. 166)
– Position the cover with the membrane. Mount and tighten screws.
Info
Clean up overflowed or spilt brake fluid immediately with water.