Maintenance work on chassis and engine – KTM 690 ENDURO EU User Manual

Page 130

Advertising
background image

MAINTENANCE WORK ON CHASSIS AND ENGINE

128

600619-10

– Refill the coolant.

Alternative 1

Coolant (

P. 166)

Alternative 2

Coolant (mixed ready to use) (

P. 166)

– Fill the radiator completely with coolant. Mount radiator cap 

.

100283-11

– Remove the cap from compensating tank 

and add coolant to the level shown in the

figure.

– Mount the cap of the compensating tank.

Danger

Danger of poisoning Exhaust gases are poisonous and can result in
unconsciousness and/or death.
– When running the engine, always make sure there is sufficient ventilation,

and do not start or run the engine in a closed space.

– Start the engine and run it until the 5th bar of the temperature indicator lights up.
– Switch off the engine and allow it to cool down.
– After the engine has cooled down, check the coolant level in the radiator and in the

compensating tank again and add more coolant if necessary.

Advertising
This manual is related to the following products: