KTM 690 ENDURO EU - Manual (Page 104)

MAINTENANCE WORK ON CHASSIS AND ENGINE
102
100275-01
– To check spoke tension, tap each spoke with a screwdriver.
Specification
You should hear a high note.
Spoke nipple, front wheel M5 4 Nm (3 lbf ft)
Spoke nipple, rear wheel M5 4 Nm (3 lbf ft)
Info
If you hear different tone frequencies from different spokes, this is an indication
of different spoke tensions.
9.48
Removing the seat
100230-10
– Pull on strap  and raise the rear of the seat at the same time.
– Pull back the seat and lift it off.