KTM 690 ENDURO EU - Manual (Page 97)

MAINTENANCE WORK ON CHASSIS AND ENGINE
95
– Fully tighten screw  .
Specification
Screw, fork stub M8 15 Nm (11.1 lbf ft)
9.42
Removing rear wheel x
– Jack up the motorcycle. ( P. 56)
100267-10
– Press the brake caliper by hand on to the brake disc in order to press back the brake
piston.
– Remove nut  . Remove chain adjuster  .
– Holding the rear wheel, withdraw the wheel spindle  .
100268-01
– Push the rear wheel forwards as far as possible and take the chain off the rear sprocket.
Warning
Danger of accidents Reduced braking due to damaged brake discs.
– Always lay the wheel down in such a way that the brake disc is not damaged.
– Take the rear wheel out of the swing arm.
Info
Do not operate the foot brake when the rear wheel is removed.