Kyocera FS-C5100DN - Manual (Page 11)

Installation
7 On the Printer Port page, select the port connected to your printing system.
8 On the Custom Installation page, select the driver and software packages you
want to install from the Driver and Utility tabs, and clear those not intended for
installation. Click Next.
9 On the Printer Settings page, you can assign a name for the printing system.
This name appears in Windows Printers and Faxes and in the Print dialog box
in applications. You can also choose to share this printer with others or set this
printer as the default printer. Make your selections, and then click Next.
10 On the Confirm Settings page, click Install if the settings are correct. Click
Back to correct the settings.
11 The Installation Completed page appears displaying the installation details.
Print a test page
This selection verifies a connection with the printer and creates a print out of
the installed driver components.
Show Quick Print Tab
This selection lets you define basic print options into group profiles that can
be accessed easily. The Show Quick Print tab option also appears in the
Administrator Settings in the Device Settings tab.
Enable Status Monitor
The Status Monitor displays system status messages on your computer
screen during printing tasks. The Status Monitor button appears on the
Advanced tab.
Device Settings
Select Device Settings to open the Device Settings tab where you can
choose installed options for your printing system. (In Windows Vista, or with
a USB connection, the Device Settings check box is not displayed).
When the installation completes successfully, click Finish to exit the installation
wizard and return to the Product Library CD menu.
Software installation failures generate the following message:
One or more software installations have failed.
Click Finish, and retry the installation. If the same message appears again,
contact your system administrator.
The installation of the printer is now complete. If prompted, restart your
computer.
Installing on Windows Vista and Windows XP with a Network
Connection
This section describes the custom installation procedure of the driver software
on Windows Vista and Windows XP using a Network connection.
1 Ensure that your printer and computer are connected to a network.
2 On the Installation Method page, select Custom Mode.
KX DRIVER 1-5