Adding or editing a watermark, Adding or editing a watermark -4 – Kyocera FS-C5100DN User Manual
Page 73
Advanced
You can create a new watermark that displays your chosen text. Any watermark
can be edited, though a limited number of options can be changed for default
watermarks.
1
In the Advanced tab, click Watermark.
2
In the Watermark dialog box, click Add to create a user defined watermark; or
under Select watermark, select a default or custom watermark and click Edit.
3
Under Watermark name, type a name, up to 39 characters. A default
watermark cannot be renamed.
4
Under Watermark text, type your preferred text. This option is not available
when editing a default watermark.
5
Select the desired font, style, and size of the text.
6
Select the color of the watermark from the list of default colors. For custom
colors, select Custom, and click the button to open the Color dialog box. Click
one of the Basic colors and click OK, or click Define Custom Colors to open
and select from the color spectrum panel.
7
Select the watermark Count, to a maximum of 20. In the Spacing spin box,
select the distance between two or more watermarks in tenths of an inch or in
millimeters.
8
Select the Position of the watermark with one of the following options.
Centered [default]
This option places the center of the watermark text in the center of the page.
User defined
This option lets you manipulate the x and y coordinate boxes to move the
text around the page.
You can also change the position by clicking the position button at the bottom of
the preview area. Click and hold as you drag the pointer to move the watermark
image.
9
Select the Angle of the watermark with one of the following options.
Diagonal [default]
This option places the watermark text at the default angle on the page.
User defined
This option lets you type a degree value for the angle. An angle is measured
in degrees, from 0 to 360.
You can also change the angle by clicking the angle button at the bottom of the
preview area. Click and hold as you drag the pointer to move the watermark
image.
10
The Rotate around center check box at the bottom far right of the dialog box
determines the method of rotation for the watermark. You must select User
KX DRIVER
9-4