Black & white mode, Lock security settings, Administrator password – Kyocera FS-C5100DN User Manual
Page 21: Setting the administrator password, Clearing the administrator password, Snmp
Device Settings
Black & White mode disables all color settings in the driver’s Imaging tab and
prints with black toner only.
To enable this feature, open Device Settings and click Administrator > Black
& White mode.
If the Security Watermark plug-in is installed, Lock Security Settings appears
in the Administrator Settings dialog box. The administrator can ensure that a
security watermark is printed on all jobs by locking this feature.
You can set Password protect administrator settings in the Administrator
Settings dialog box to prevent unauthorized changes in this dialog box. When
selected, this setting will prompt you to enter a password and confirm the
password. This password protection blocks access to the Job accounting,
SNMP Settings, Show Quick Print tab, Color page count, Lock Security
Settings, and Black & White mode settings.
Setting the Administrator Password
1
In Device Settings > Administrator Settings, select Password protect
administrator settings.
2
In the Password dialog box, enter a password, using at least 4 and no more
than 16 characters. Reenter the password in Confirm password and click OK.
Clearing the Administrator Password
1
In the Device Settings tab, click Administrator.
2
In the Enter Password dialog box, type the password and click OK.
3
In the Administrator Settings dialog box, clear the Password protect
administrator settings check box.
4
Click OK.
Simple Network Management Protocol (SNMP) is a set of rules that govern the
management of network devices, such as printing systems. SNMP settings
determine the level of security when using the Auto Configure feature, and
prevent unauthorized printing to the SNMPv3 printing system. SNMP settings
must be set in the printer driver and in the printing system’s Command Center.
The following SNMP options are available:
SNMPv1/v2c
This option ensures successful Auto Configure communication using Read
community name and Write community name.
SNMPv3
KX DRIVER
2-7