Kyocera FS-C5100DN - Manual (Page 8)

Installation
5 To begin the installation, click Install Software.
Note: If the Windows Security warning dialog box appears at any point
during the installation process, click Install this driver software anyway.
6 The Installer wizard appears.
The installation differs based on your operating system and connection method.
Select your operating system and connection method from the following list and
proceed to the reference page to continue the installation.
Express Installation
Installing on Windows Vista and Windows XP on page 1-2
Custom Installation
Installing on Windows Vista and Windows XP with a USB Connection on page
1-4
Installing on Windows Vista and Windows XP with a Network Connection on
page 1-5
Note: KPrint installs a client port monitor that lets Windows TCP/IP print from
any network card connected to a printing system. KPrint supports LPR and IPP
printing. For the KPrint Installation instructions, refer to your Product Library
CD. KPrint uses a stand-alone installer.
Installing Utilities
On the Installation Method screen, click Utilities to install printer utilities. You
can also select utilities to install during the Custom Installation procedure.
Upgrading Driver Components
If the installation wizard detects older driver or utility components, the Software
Component Upgrade page appears.
1 Choose the component to upgrade. Click Next.
2 Confirm your upgrade settings. To start the upgrade, click Upgrade.
3 When the upgrade completes, click Next. The Installation Method page
appears.
Express Installation
Express Mode applies to driver installation for a USB or network connection
only. The installation wizard discovers printers that are turned on, and
connected by USB and network cable. In Custom Mode, you are able to select
the installation packages and specify the port.
Installing on Windows Vista and Windows XP
This section describes the express installation procedure of the driver software
on Windows Vista and Windows XP.
User Guide 1-2